 |
 |
|
|
 |
|
 |
|
The “PDS series multi-angle tension detector " uses steel as the backbone of the mechanism, which can withstand stress for a long time and keep the mechanism from deforming.
The detector is mounted on the shaft end of the roller to convert the material load into an electrical signal for surface tension detection. |
|
 |
|
• |
The design of the round cake shape allows the tension detector to be installed in a wide angle range. |
• |
The structure of the mother and daughter axles can reduce the friction of the rollers and is suitable for occasions with low tension requirements. |
• |
The tension detector with high sensitivity and temperature compensation circuit makes the linear error of tension detection low. |
• |
Amplifier design option available, which can direct interchange with LMS series tension detectors. |
|
 |
 |
|
|
|
|
| Tension Detector PDS series Specification -1 |
 |
| Model No. |
PDS-3025 |
PDSA-1525 |
PDSA-3025 |
PDSA-3025-AR |
PDSA-5025 |
PDSA-5025-AR |
| Rated load |
30Kg |
15Kg |
30Kg |
30Kg |
50Kg |
50Kg |
|
 |
| Load direction |
Compression and Stretching |
| Mounting |
Side embedded-fixing |
|
|
| Supply voltage |
DC 5V/min ~
DC 10V/max |
DC 5V(standard value) |
|
|
| Connection wire |
7.5M x 4C Isolated-cable |
| Continuous accuracy |
0.5% |
| Temperature coefficient |
0.5% / 10K |
Normal characteristic
value |
1mv/V |
| Lateral axial force |
Rated Load (F) |
| Bearing bore diameter |
∮ 25mm |
| Mechanical limit |
2.5 F |
| Protection class |
IP 54 |
| Operation conditions |
Ambient temperature：-10～60℃ Vibration：2m/s or less |
|
|
| Bridge Impedance & Output |
350 Ohm |
0～±300mV(5mA max.) |
| Weight |
0.95 kg |
1.2 kg |
| Applicable controller |
YTTC-260A
YTTC-5260g |
TC-2010, TC-3210, TC-2050, TC-2050P, TC-2060, TC-3050, YTTC-5260 |
|
|
|
 |
| Tension Detector PDS series Specification -2 |
|
| Model No. |
PDSA-10035 |
PDSA-20035 |
PDSA-30035 |
|
|
|
| Rated load |
100Kg |
200Kg |
300Kg |
|
|
|
|
|
| Load direction |
Compression and Stretching |
| Mounting |
Side embedded-fixing |
|
|
| Supply voltage |
DC 5V(standard value) |
|
|
| Connection wire |
7.5M x 4C Isolated-cable |
| Continuous accuracy |
0.5% |
| Temperature coefficient |
0.5% / 10K |
Normal characteristic
value |
1mv/V |
| Lateral axial force |
Rated Load (F) |
| Bearing bore diameter |
∮ 35mm |
| Mechanical limit |
2.5 F |
| Protection class |
IP 54 |
| Operation conditions |
Ambient temperature：-10～60℃ Vibration：2m/s or less |
|
|
| Bridge Impedance & Output |
0～±300mV(5mA max.) |
| Weight |
4.9 kg |
| Applicable controller |
TC-2010, TC-3210, TC-2050, TC-2050P, TC-2060, TC-3050, YTTC-5260 |
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
|
