 |
 |
|
|
|
 |
|
 |
Edge Position Controller EPD-3008P
The same as the EPD-3008 function; the operation panel and controller of the EPD-3008P are separated, and the controller can be installed in the control box independently or hidden in the mechanism. |
|
 |
• |
Built-in DC motor feedback loop that can select a drive unit, which accepts feedback signal, and enhance the accuracy and response of edge alignment. |
• |
Combining the operation panel and controller together can mount on the surface of a plate or externally stand-alone for operation. |
• |
Accepting vary of Edge Position Detectors. |
| • |
Working to vary of drive units, such as EPM series electric cylinders. |
| • |
Built-in the loop of edge position output signal that can connect to the external high-capacity drive unit and enlarge drive capacity. |
| • |
Equipped with RS-485 communication that can connect to computers. |
|
|
 |
 |
|
| Edge Position Controller EPD-3008P Specifications |
 |
 |
| System |
|
| Power |
AC 220V±10%, 50 / 60Hz, 200mA |
| Detector’s power |
DC±12V, 150mA max. |
| Operation mode |
Outside(connected to EPOP-03 Operator or other control panel) |
| Ambient temperature |
0°C ~45°C |
| Ambient humidity |
35 - 85% RH (No condensation) |
| Environment requirement |
Without corroded gas, flammable gas and conduction dust |
| Weight |
4.4Kg |
|
|
|
| Mechanic data |
|
| Mounting |
Mounted in the inside of control box |
| Housing |
Iron Box with powder-coating |
| Dimension |
Refer to “Dimension Diagram” |
|
|
|
| Electric data |
|
| Input signal of detection |
DC±8V, Input impedance 20K |
| Detector communication signal |
Work with the communication type detector
(Fast response transmission, Euntay Electric product specification) |
| Output analog signal of edge-position |
DC 0 ~ ±8V, 5mA max. |
| Output to Motor |
DC 0 ~ ±24V, 3A max. |
| Communication |
RS-485 RTU communication mode |
|
|
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
|
