![]() |
 |
 |
|
|
 |
|
|
 |
TC-2010 receives tension detected signal from LMS series, PDS series of tension detector, built-in 16 bits high-speed microprocessor with the function of calculation, presenting fast and stable tension control performance.
It’s specially developed for the tension control system, which needs multi-motor motion proportional linkage, with high precision and high stability, it is also able to do general rewinding tension control.
|
|
 |
• |
It includes a digital type of line-speed proportional linkage function, which can maintain stable tension control from starting,accelerating, or decelerating to stopping. |
• |
Multi-level P.I.D, which can present a fast and stable function when speed is variable at any time. |
• |
Large subtitles high brightness LED numeric display, which can be selected by the parameter “SRC” to display different units, such as kg.m/min, etc.. |
• |
The parameter function is symbolized by English abbreviations and can be easily operated without relying on the manual. |
| • |
There are LED window displays, “RUN” is for running, “HIP” is for the high limit, “LOP” is for the low limit, and “ALM” is for the abnormal messages. |
| • |
The terminal that can receive a set of encoder or pulse signals is regarded as the source of the line-speed signal. |
| • |
Line-speed signal can accept an analog signal of DC 0 ~ 10V.. |
| • |
There are two sets of terminals, which are digital multi-functions contact, that could be for the acceleration or deceleration compensation. |
| • |
The terminal can provide an output signal of DC 0 ~ 10V for actual tension display. |
| • |
It includes RS-485 communication function, and could connect to PLC, human machine interface, and industrial computer for control. |
| • |
The terminal’s output signal of DC 0 ~ 10V could directly control the torque controller, a current-control type of vector inverter, DC motor drive, and servo motor drive. |
| • |
Working with LMS series of load cell, rated load of 5Kg ~ 1,000Kg (50NM～10,000NM). |
|
 |
 |
|
| Tension controller TC-2010 Specification |
 |
| Applicable load |
5~2,000Kg |
| Supply Voltage |
AC 220V, 50/60Hz |
| Surge current |
5A |
| Power consumption |
20VA |
| Ambient temperature |
0℃～40℃ |
| Ambient humidity |
80%RH |
| Weight |
~0.8kg |
| Mounting |
Panel / Embedded type |
|
 |
| Contact output |
The lower point or abnormal
The upper limit of the high point |
Two sets of output
DC 30V/0.5A, AC 220V/1A |
|
|
| Detector’s Input |
DC0～300mV ( LMS/PDS(A)series ) |
|
|
| External signal input |
Line-Speed signal |
DC 0~10V, 0～18KHZ, input impedance 20KΩ |
|
|
| Contact input |
| Accelerated compensation |
input impedance 20KΩ |
| Decelerated compensation |
input impedance 20KΩ |
| Start for running |
input impedance 20KΩ |
|
|
|
| Control output |
| Tension-value signal |
DC 0~10V/20mA max. |
| Speed signal |
DC 0~10V/20mA max. |
|
|
|
| Communication |
RS485 MODBUS RTU |
|
|
|
|
 |
|
 |
 |
|
| Tension controller TC-2010 Wiring diagram |
|
 |
|
 |
|
| Tension controller TC-2010 Dimension diagram |
|
 |
|
 |
|
| Tension controller TC-2010 Application diagram |
|
| Central guiding tension control |
|
| |
 |
|
| Tension controller TC-2010 Application example |
|
|
|
|
 |
| The application example of the picture is shoed that Tension Controller TC-2010 is applied to the tension control of central guiding in the fabric laminating machine, it could keep fabric surface be flat in laminating. |
|
| |
|
 |
 |
 |
|
 |
|
|
![]() |
| |
|
| Euntay Electric Co., Ltd. |
Motion Control System Manufacturer in Taiwan, |
| Tension Control System Manufacturer in Taiwan, |
| Edge Position Control System Manufacturer in Taiwan, |
| Tension Controller, Load Cell , Tension Detector, Sensor |
| Edge Position Controller, EPC, Edge Guide Sensor,Web Guiding, |
Ultrasonic EPC Detector , Infrared EPC Detector , Electric Cylinder , |
| Hydraulic type Drive, Double loop Hydraulic Drive, Web Guide |
| Web Guiding Machine, DC Motor Drive, Digital DC Motor Drive |
|
|
|
|
