![]() |
 |
 |
|
|
|
 |
|
 |
Central Position Guide Unit WCPC-150D (Two rollers type)
WCPC-150D is a central position guide unit, specially designed to correct slipping-off in the production line of fabrics, non-woven, papers, films, leathers, adhesive tapes, and conveyors. It could work with a web-width measurer, Infrared type detector, or ultrasonic-type detector to reach the function of dynamic edge-offset correction. |
|
 |
‧ |
Accurate positioning: WCPC-150D adopts a ball screw and motor as mechanical drive, with minimum backlash, high torque, and high response, and the motor is accurate, stable, and reliable. |
‧ |
Wide application: It can be used for cloth, non-woven fabrics, paper, film, leather tape, conveyor belts, etc. |
‧ |
High automaticity: EPD-3008-A / EPD-3008P+ EPOP-03A (Embedded type) Controller adopts a digital signal process chip, self-calculating and adjusting the offset of materials in moving, and makes it run smoothly and reduces large jitter. |
|
|
 |
 |
|
Central Position Guide Unit WCPC-150D
(Two-rollers type) Specifications |
 |
| Max. Trust |
150 Kgf |
| Oblique Movement Speed |
60 mm/sec |
| Max. Stroke |
170 mm |
| Motor |
DC Permanent Magnet Servo Motor |
| Screw |
Ball Screw |
| Controller |
EPD-3008-A、EPD-3008P+EPOP-03A |
| Detector |
EPS-5051、EPS-623、EPS-708、EPS-706SH、EPS-823、WWD-600 |
| Power Supply |
AC220V±10% 50/60HZ |
 |
|
| Drive & Control Functions |
Manual forward and reverse, automatic (detector), center position return, detection position indication, Limit switch indication |
|
|
| Communication |
RS-485 RTU Communication Mode |
| NET Weight |
Two-rollers type 66Kg (Not including the weight of the roller) |
|
 |
| Working Environment |
0℃～45℃
35～85%RH (No condensation)
Without corroded gas, flammable gas, and conduction dust埃 |
|
|
|
 |
|
 |
 |
 |
 |
 |
|
|
 |
 |
|
![]() |
