![]() |
 |
 |
|
|
|
 |
|
 |
| Web Guiding Machine CPC series is composed of detector, controller and a centering structure, which is suitable for material’s guiding and central-alignment at the machining of the middle process of transparent / non-transparent printing materials, paper, and metal films, to prevent material in the process from being offset in transmission and ensure the reliability of processing. |
|
 |
‧ |
Suspension angle up to 360 degrees. |
‧ |
A high-sensitivity, high-resolution detector that accurately identifies the location of the edge of the material. |
‧ |
Ball screw, precise displacement, low loss. |
| ‧ |
Integrated design for detector, controller, and driving device, easy to operate and install. |
| ‧ |
The whole system adopts digital control technology, so it can be connected to a computer, PLC or human-machine interface via RS-485. |
|
|
 |
 |
|
|
|
| Web Guiding Machine CPC series Specifications |
 |
| System |
 |
| Model No. |
CPC-350A |
CPC-600A |
|
| Power |
AC 180 ~ 245V, 50 / 60Hz, about 75VA |
| Detector |
EPS-706+ Ultrasonic Detector
EPS-708 Infrared Detector
EPS-5051 Infrared Detector
Two-color and Line-alignment detector |
|
| Material width |
350mm max. |
600mm max. |
|
| Tension control |
200N max. |
|
| Drive device |
CPC-350A web guider |
CPC-600A web guider |
|
| Ambient temperature |
0°C ~40°C |
| Ambient humidity |
35 - 85% RH (No condensation) |
| Environment requirement |
Without corroded gas, flammable gas and conduction dust |
|
|
 |
|
| Mechanic data |
 |
| Mounting |
Direct screw-lock |
| Housing |
Aluminum |
| Dimension |
Refer to “Dimension Diagram” |
|
|
|
| Electric data |
|
| Output to motor |
DC 0 ~ ±24V 2.4A (3A max.) |
| Controller digital terminal input |
Limit switch
Back to central point switch (BACK CENTER)
Two sets of detector input selection; IN1, IN2
RS-485 Communication |
| Analog control output |
DC 0 ~ ±10V, 5mA max. |
| Contact output |
Abnormal contact AC220V 1.0A |
| Communication |
RS-485 RTU communication mode |
|
|
|
 |
|
|
 |
 |
 |
|
|
 |
 |
|
![]() |
